Environmental Monitoring for Server Rooms & Cold Storage
Pick a category, open any solution to read how it works and how BearTech delivers it, check the FAQs, and send an enquiry — all from this one page.
Only need the hardware, not installation? Visit Bulk Material Supply instead.
Intrusion, fire and environment monitoring
Intrusion & Burglar Alarm
Wireless motion and door/window sensors that trigger a siren and remote alert on unauthorised entry.
View solutionFire & Smoke Alarm Integration
Smoke and heat detectors integrated into the same wireless alarm panel as intrusion sensors.
View solutionPanic Button & Vehicle Safety Alert
An SOS trigger inside a vehicle that shares the current GPS location with a designated contact or control room.
View solutionEnvironmental Monitoring for Server Rooms & Cold Storage
Temperature and leak sensors on the same wireless alarm platform, alerting before equipment or stock is damaged.
View solutionEnvironmental Monitoring for Server Rooms & Cold Storage
Quick answer
Environmental monitoring adds temperature and leak sensors to an AJAX wireless alarm panel, so a server room or cold store that drifts out of range or takes on water sends an alert to the owner's app. BearTech scopes the sensors after a site visit; the AJAX Hub costs ₹18,591.90 including GST, with installation quoted separately.
A server room overheating or a cold-storage unit failing overnight can cause damage long before anyone notices — by the time it's visually obvious, the equipment or stock is often already ruined. Environmental monitoring adds temperature and leak-detection sensors to the same wireless alarm platform used for intrusion and fire, so a temperature swing outside the safe range or a water leak triggers an alert immediately.
BearTech configures AJAX-compatible temperature and leak sensors for spaces where equipment or stock damage from environmental conditions is a real financial risk — server/network rooms, cold storage, and similar sensitive spaces.
This is a targeted addition for businesses with a specific environmental risk point (a server room, a cold room) rather than a general-purpose solution for every premises — worth discussing whether your specific risk justifies it.
Defining the risk before choosing sensors
Start with what could go wrong and what it would cost. For a server room, the usual risks are air conditioning failure and water from a leaking pipe or AC drain. For a cold room, it is the cooling unit failing overnight or a door left open. Note the safe temperature range your equipment or stock needs, where water could enter, and when the space is unattended. Share this with BearTech. The answers decide whether you need temperature sensors, leak sensors or both, and where each should be placed for an early warning.
Who acts on an alert at night
An alert at 2 a.m. is useful only if someone can act on it. BearTech does not monitor sensors for customers; alerts go to the owner's AJAX app. Decide who else should receive them, such as the IT person, the facility manager or the cold-store operator, and make sure at least one of them can reach the site or call someone nearby. Write down simple first steps: check the AC, shift stock, switch off power to a leaking area. Remember that the hub sends alerts over the SIM or data connection you supply, so do not let it lapse.
Steps from site visit to a working alert
First, a site visit or a technical phone discussion to understand the room, the risk and any existing AJAX system. Second, a quotation listing the hub if needed, at ₹18,591.90 including GST for the AJAX Hub, plus sensors and installation. Third, installation and pairing of each sensor with the panel and the owner's app. Fourth, a test: BearTech and your team confirm that each sensor's alert reaches every intended phone. Finally, note the support number, 97526 44035, near the panel. AMC is available if you want regular upkeep of the system.
Enquire about this solution
Share a few details — we'll get back to you with next steps.
Call 97526 44035